Side Rails:Z & C Sections - Butt|Sleeved System|Accessories|Building Shell|pre-hot|dipped galvanised steel|profile

Side Rails: Z and C-section Butt Systems

Z-Section

C-Section

The z and c-section butt side rail systems are suitable for buildings with single bays or more and offers a simple cleat connection to z or c-section side rails. This system is intended for smaller buildings, short or uneven spans or light loading conditions.

The z and c-section butt systems cater for spans of up to 15m depending on the load to be applied and where the cladding or liner tray offers adequate lateral support by virtue of its screw fixings at 600mm maximum spacing to the side rails.

The z and c-section butt systems cater for single bays and can therefore be used in conjunction with other systems or as a system in their own right.

Side Rails: Z and C-section Sleeved Systems

Z-Section

C-Section

The z and c-section sleeved side rail systems optimise the use of z or c-section side rails by incorporating sleeves at the penultimate column with a staggered sleeving arrangement on internal bays.

The z and c-section sleeved systems cater for spans up to 15m depending on the load to be applied and where the cladding or liner tray offers adequate lateral support by virtue of its screw fixings at 600mm maximum spacing to the side rails.

The z and c-section sleeved system can be designed and supplied as either a single or double span system to suit individual requirements.

Accessories

A wide range of side rail cladding accessories are available from Metsec and include:

Cleats
Sheeting Posts
Wind Bracing
Column Ties and Parapet Posts
Service Supports
Side Rail Supports
Diagonal Tie Wires
Panel Joint Rails
Horizontal Cladding Supports
Rapid Rail Support System

For details of the full range of Metsec accessories and their uses, consult the Technical Manual.

Side Rails: Z and C-sections

Side Rails: Z and C-section Butt Systems

Side Rails: Z and C-section Sleeved Systems

Accessories

Further information